Muratec F-116 User's Guide Page 24
- Page / 81
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Basic setup_ 23
8. Turn the machine on.
This equipment will be inoperable when mains power fails.
Changing the display language
To change the language that appears on the display, follow the steps below:
1. Press
Menu until Machine Setup appears.
2. Press the
left/right arrow until Language appears and press OK.
3. Press the
left/right arrow to display the language you want.
4. Press
OK to save the selection.
5. Press
Stop/Clear to return to ready mode.
Setting the date and time
When you set the time and date, they are used in delay fax and delay print. They are printed on reports. If, however, they
are not correct, you need to change it for the correct time being.
If the machine’s power is cut off, you need to reset the correct time and date once the power has been restored.
1. Press Menu until Machine Setup appears.
2. Press the
left/right arrow until Date & Time appears and press OK.
3. Enter the
correct time and date using left/right arrow or numeric keypad.
Month = 01 to 12,
Day = 01 to 31,
Year = requires four digits,
Hour = 01 to 12,
Minute = 00 to 59,
and you can also select AM or PM.
4. Press
OK to save the selection.
5. Press
Stop/Clear to return to ready mode.
Changing the clock mode
You can set your machine to display the current time using either a 12-hour or 24-hour format.
1. Press
Menu until Machine Setup appears.
2. Press the
left/right arrow until Clock Mode appears and press OK.
3. Press the
left/right arrow to select the other mode and press OK.
4. Press
Stop/Clear to return to ready mode.
Setting sounds
You can control the following sounds:
• Key so
und: Turns the key sound On or Off. With this option set to On, a tone sounds each time a key is pressed.
• Alarm So
und: Turns the alarm sound On or Off. With this option set to On, an alarm tone sounds when an error
occurs or fax communication ends.
• Speaker: T
urns On or Off the sounds from the telephone line through the speaker, such as a dial tone or a fax tone.
With this option set to Comm. which means “Common”, the speaker is on until the remote machine answers.
• You can adjust the volume level using On Hook Dial. You can adjust the volume level using the handset.
• This feature is supported only in North America.
• Ring
er: Adjusts the ringer volume. For the ringer volume, you can select Off, Low, Med, and High.
Speaker, ringer, key sound, and alarm sound
1. Press Menu until Sound/Volume appears.
2. Press the
left/right arrow until the sound option you want appears and press OK.
3. Press the
left/right arrow until the desired status or volume for the sound you have selected appears and press OK.
4. If necessary, r
epeat steps 2 through 3 to set other sounds.
5. Press
Stop/Clear to return to ready mode.
Speaker volume
To adjust the volume using On Hook Dial:
- F-116 User Guide 1
- Copyright 2
- Contents 3
- MAINTENANCE 4
- TROUBLESHOOTING 5
- SUPPLIES AND ACCESSORIES 5
- SPECIFICATIONS 5
- Safety information 6
- Operating method 7
- Installation / Moving 8
- Maintenance / Checking 8
- Supply usage 9
- Regulatory information 10
- Recycling 11
- China only 11
- Taiwan only 11
- Radio Frequency Emissions 12
- Russia only 12
- Germany only 12
- Fax Branding 12
- Ringer Equivalence Number 13
- Important warning: 14
- About this user’s guide 16
- Finding more information 17
- Features of your new product 18
- Introduction 19
- Rear view 20
- Control panel overview 21
- Understanding the Status LED 22
- Introducing the useful button 22
- Turning on the machine 22
- Basic setup 23
- Changing the display language 24
- Setting the date and time 24
- Changing the clock mode 24
- Setting sounds 24
- Keypad letters and numbers 25
- Correcting numbers or names 25
- Inserting a pause 25
- Using the save modes 26
- Setting the paper 26
- Media and tray 27
- Selecting print media 28
- Changing the tray size 29
- Loading paper in the tray 30
- Using the output support 31
- Basic copy 32
- Setting copy timeout 33
- Preparing to fax 34
- Sending a fax 34
- Faxing_ 34 35
- Sending a priority fax 36
- Receiving a fax 37
- Faxing_ 37 38
- Resolution 39
- Darkness 39
- Setting up address book 40
- Faxing_ 40 41
- Faxing_ 41 42
- Fax setup 43
- Advanced fax setting options 44
- Copy setup 45
- Printing a report 45
- Clearing memory 45
- Menu overview 47
- Maintenance 49
- Cleaning the scan unit 50
- Maintenance_ 50 51
- Storing the Toner cartridge 52
- Maintenance_ 52 53
- Troubleshooting 54
- Input Misfeed 55
- Tips for avoiding paper curls 56
- Tips for avoiding paper jams 57
- Clearing paper jams 57
- Inside the machine 58
- In exit area 58
- Troubleshooting_ 58 59
- 1 Pressure lever 59
- Checking display messages 60
- Troubleshooting_ 60 61
- Solving other problems 62
- Troubleshooting_ 62 63
- Troubleshooting_ 63 64
- Troubleshooting_ 64 65
- Copying problems 66
- Fax problems 67
- Supplies and accessories 68
- Replacing the toner cartridge 69
- Supplies and accessories_ 69 70
- Specifications 71
- Print media specifications 72
- Glossary 73
- Glossary_ 73 74
- Glossary_ 74 75
- Glossary_ 75 76
- Glossary_ 76 77
- Glossary_ 77 78
- Glossary_ 78 79
Related products and manuals for Laser/LED printers Muratec F-116
Laser/LED printers Muratec MFX-3550 User's Guide
(213 pages)
(213 pages)
Laser/LED printers Muratec F-112P User's Guide
(214 pages)
(214 pages)
© 2020, manymanuals.com. All rights reserved. | 1.006 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals