Muratec MFX-C2500 User Manual download pdf (Page 65)

Maintenance_65

2. Grasp the handles on the toner cartridge and pull to remove the

cartridge from the machine.

3. Holding both handles on the toner cartridge, thoroughly rock it from side

to side to evenly distribute the toner.

4. Slide the toner cartridge back into the machine.

5. Close the front cover. Make sure the cover is securely latched.

REPLACING THE TONER CARTRIDGE

The machine uses four colors and has a different toner cartridge for each

one: yellow (Y), magenta (M), cyan (C), and black (K).

• The status LED and the toner-related message on the display indicates

which each individual toner cartridge should be replaced.

• Incoming incoming faxes are saved in memory.

saved in memory.

At this stage, the toner cartridge needs to be replaced. Check the type of

toner cartridge for your machine. (See "" on page 90.)

1. Turn the machine off, then wait a few minutes for the machine to cool.

2. Using the handle, completely open the front cover.

When you open the front cover, be careful not to touch the

underneath of the control panel (the lower part of the fuser unit). The

temperature of the fuser unit might be high and could damage your

skin.

When you open the front cover and work inside the machine, it is

highly recommend that you remove the paper transfer belt first.

Because the work you do could contaminate the paper transfer belt.

If toner gets on your clothing, wipe it off with a dry

cloth and wash it in cold water. Hot water sets toner into

fabric.

If the front cover is not completely closed, the machine will not

operate.

• Do not touch the green surface, the OPC drum or the front of

each toner cartridge, with your hands or any other material. Use

the handle on each cartridge in order to avoid touching this area.

• Be careful not to scratch the surface of the paper transfer belt.

• If you leave the front cover open for more than a few minutes, the

OPC drum can be exposed to light. This will cause damage to the

OPC drum. Close the front cover should the installation need to

be halted for any reason.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 159 160

No comments

Muratec MFX-C2500 User Manual Page 65