Muratec F-520 User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 110
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
2-6 Network settings
Subnet Mask
Subnet mask is the mask value that specifies the IP address range of the subnet.
NOTE: If your server is DHCP compliant, the subnet mask will be assigned automati-
cally and it cannot be edited.
1
Open the TCP/IP setting menu display. (Refer to page 2-2.)
2
Press [Subnet Mask].
3
Enter the appropriate IP address of the subnet mask using the numeric keys.
Press the arrow keys to navigate the IP address fields. Press the [Clear] to
delete a number.
4
Press [Enter]. The display returns to the TCP/IP setting menu.
You may configure additional settings.
To return to the Standby mode, press [Reset].
5
After you have completed registering the network settings, the machine
should be rebooted to enable the new settings. To reboot the machine, turn the
machine “Off and after three or more seconds, turn the machine back “On”
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 109 110

Comments to this Manuals

No comments