Muratec F-100 Operations Instructions download pdf (Page 15)

Unpack the toner cartridge from its carton.

Then, holding the toner cartridge with both

hands, shake it well as shown (note the arrows).

Install the toner cartridge in the printer, making sure that the cartridge’s

four pins (two each at the front and rear sides) fit in the slits inside the

printer frame.

Swing the printer cover back down. Push

down on a portion of the cover to lock the

cover into its normal position.

Note: The fax machine will not work if the

cover isn’t closed properly.

When you install a new drum cartridge

Important: Use this setting only when you are installing a new drum cartridge.

Your fax machine keeps track of how many pages go through the drum cartridge to

let you know when the drum needs to be replaced. Thus, whenever you install a

new drum cartridge, you must “notify” the machine by resetting the drum counter.

(Obviously, before doing so the very first time, you’ll have to finish installing the

machine and then turn it on [see page 1.8].) Here’s how to reset this counter:

Press /

PROGRAM

, 2, 1,

ENTER

. The

LCD

will show:

Press

ENTER

to reset the drum counter.

Loading paper

Of course, one of your fax machine’s most outstanding features is how it prints

faxes and makes copies on plain paper! Now, everything that comes out of your fax

machine is ready for distribution or archiving, right from the start.

The following instructions tell you how to load the recording paper — the paper on

which the fax machine makes its printouts (copies and received faxes). Your

machine can hold up to 650 sheets at a time: 500 sheets in the paper cassette and

150 sheets in the multipurpose tray.

Loading the paper cassette

Pull forward on the paper cassette to slide it out.

Insert up to 500 letter-sized sheets into the cas-

sette, placing the edges of the top sheet under the

metal tabs on the left side of the cassette (viewed

from the cassette’s front, as shown).

Important: Be sure to load the cassette with

only letter-sized paper.

Push the paper cassette back into its original

(closed) position. You’ll feel a click when it’s properly in place.

Loading the multipurpose tray

You may use either letter- or legal-sized paper in the multipurpose tray, but not

both at the same time; don’t mix the sizes.

Adjust the multipurpose tray for the

length of paper you plan to load. Pull

slightly upward on the paper-length

guide in the cassette, then slide the

guide to the slot (either

LTR

LGL

) for

the paper size you’ll be loading.

Important: You must set your machine to recognize the size of paper you’ve

loaded (see page 1.8 for details).

Slightly “fan” the paper you will be loading, to help ensure smooth feeding.

Insert up to 150 sheets of paper into the tray. Make sure the paper-length

guide and the paper-width guide now fit against the paper’s edges.

Important: To avoid paper jams, do not refill this tray without first remov-

ing all of any paper which may remain in it. In other words,

don’t just add sheets to an already-loaded stack.

Paper-width guide

Paper-length guide

Reset Drum Life

Check Program/Enter

1.7

Getting started

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 114 115

Comments to this Manuals

No comments

Muratec F-100 Operations Instructions Page 15

Comments to this Manuals

Related products and manuals for Fax machines Muratec F-100