Muratec F-100 Operations Instructions download pdf (Page 18)

1.10

Getting started

Your Muratec fax machine comes with EasyStart. It guides you in entering the

bare-bones settings required for normal operation — so it’s easy for you to start

using your machine quickly. (Of course, you can make other settings later or change

these settings. We’ll explain in “Beyond the basics,” beginning on page 2.1.)

Important: At the end of EasyStart, your machine will print a list of its settings.

So, first, please be sure you’ve correctly installed your machine and

loaded recording paper into it (see “Setting up,” beginning on page 1.6).

Clearing settings before beginning

Before using EasyStart, clear your machine’s built-in user data memory, which

stores settings. This insures the memory will hold only your settings.

Important: After you use EasyStart, please do not clear the memory again unless

an authorized technician asks you to do so.

To clear the machine’s memory:

Press /

PROGRAM

, *, 2. The

LCD

now asks whether you’re sure about clearing

the memory:

Note: If you don’t want to proceed, just press /

PROGRAM

If you are sure, press

ENTER

to complete the process by cancelling the existing

user data memory settings.

What do you want to do?

EasyStart will want you to enter a little information; so, first, please determine the

following before you proceed:

The type of dialing your telephone system requires — You may select

either tone or pulse (rotary) dialing.

The name and fax number you wish to appear on your faxes —

Every fax page you send will arrive at the receiving machine with a single

line of text at the very top of the page. Among other things, this text will list a

name and a fax number. The name must not be longer than 25 characters.

Note: Incidentally, the fax industry term for this text is Transmit Terminal

Identifier (

TTI

). (Another term, Subscriber

, refers to just the fax

number in the

TTI

Using EasyStart to enter initial settings

Important: Be sure your fax machine has paper before you begin EasyStart, since

this feature can print a handy settings list at the conclusion.

Important: If you press

STOP

during EasyStart, your fax machine will return to

standby mode (its normal condition) but will retain what settings you

saved by pressing

ENTER

as described in these instructions.

Press /

PROGRAM

ENTER

The

LCD

will display the current setting of the fax’s built-in calendar/clock,

with a cursor appearing under the first digit.

Use the numeric keypad to enter the correct date and time, using a

YYMMDD

format for the date and 24-hour (“military”) format for the time. For instance,

to set 8:30

on September 11, 1998, press 9 8 0 9 1 1 2 0 3 0, which results in:

Note: Your fax machine automatically inserts the spaces and date-slash. All

you have to do is enter the digits.

To change only one digit, press to move the cursor leftward, or /

PROGRAM

to move it rightward, to that digit. Then, enter the correct digit.

Press

ENTER

to save the clock setting and continue EasyStart.

Enter Time

Clear User Settings

Check Program/Enter

EasyStart

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 114 115

Comments to this Manuals

No comments

Muratec F-100 Operations Instructions Page 18

Comments to this Manuals

Related products and manuals for Fax machines Muratec F-100