Muratec MFX-C2700 User Manual download pdf (Page 103)

Maintenance > 103

4. Place the assembly in a safe place away from direct sources of heat and light.

5. Pull the locking levers at each side of the transfer belt up and towards the front of

the machine.

6. Using the locking levers (a), lift the belt (b) upwards and withdraw from the

machine.

7. Lower the new belt unit into place, with the drive gear towards the rear of the

printer. Locate the drive gear into the gear inside the printer by the rear right corner

of the unit, and lower the belt unit flat inside the printer.

8. Push the locking levers towards the rear of the machine. This will secure the belt

unit in place.

CAUTION!

The green image drum surface at the base of each cartridge is very

delicate and light sensitive. Do not touch it and do not expose it to

normal room light for more than 5 minutes. If the drum unit needs

to be out of the printer for longer than this, please wrap the

cartridge inside a black plastic bag to keep it away from light.

Never expose the drum to direct sunlight or very bright room

lighting.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 165 166

No comments

Muratec MFX-C2700 User Manual Page 103