Muratec MFX-C2700 User Manual download pdf (Page 58)

Scanning > 58

CAN

REMOTE

The following example is based on your printer being connected via USB.

1. At the MFP: Place your document(s) with text face UP in the ADF or face DOWN on

the glass.

2. Press the Scan button on the control panel to prompt the Scan Menu screen.

3. Using the Down arrow key, scroll to Remote PC and press OK.

4. At your PC: Start your scanning application.

5. Select the File menu and choose Scan or Get Photo.

A dialogue box with a list of scanning sources displays.

6. Select TWAIN:

Muratec MFX C2700 Twain.

You need to select the source only once, unless you want to choose another scanner.

7. Select a profile. Choose from:

(a) B&W Document.

(b) Grayscale Document.

(d) Color Photograph.

NOTE

By default the PC scan mode is set to simple. To enable Secure Scan Mode

refer to “PC Scan Mode” on page 149.

NOTE

After Remote PC is selected, user action is performed at your PC (Pull Scan).

NOTE

The example below is relevant to a machine being connected via USB.

> The instructions below use PaperPort

11 SE (supplied with your

machine) as an example. If you use an alternative application, the

instructions and user interface will differ.

> Only the basic instructions are included here; for full instructions on how

to use PaperPort

11 SE, refer to the documentation that accompanies

the utility.

Scan Menu

Remote PC

Local PC

USB Memory

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 165 166

No comments

Muratec MFX-C2700 User Manual Page 58