Muratec OFFICEBRIDGE ONLINE User Manual download pdf (Page 42)

Setting Scan parameter

The following settings instruct your machine how to scan documents when using the Scan mode. The default set-

tings are right for most applications, so try them before changing any of these settings:

• Document type — Set the document type according to the document you want to scan. You can select from:

Photo — Select this mode when scanning photographs or drawings.

Photo/Text — Select this mode when scanning documents containing photographs or drawings and text.

Text — Select this mode when scanning text.

(The default settings is Text.)

• Contrast — Sets how light or dark you want the documents to be.

(The default settings is Normal.)

• Resolution — Sets the resolution for your documents.

If your machine is the MFX-1700, you can choose to scan at 200 dpi, 300 dpi, 400 dpi or 600 dpi.

(The default settings is 400 dpi.)

If your machine is the MFX-1300, the resolution is fixed at 300 dpi.

Scanning at 600 dpi provides greater detail in scanned images, but creates large files and uses more memory

in your PC and your Muratec machine.

To set scan parameters:

Press Program, G, 1, 0, 1.

Press ENTER. The machine asks you to select a document type:

Press or until the mode you want appears. Then, press ENTER.

The machine asks you to select a contrast setting:

Press or until the mode you want appears.

Note: If your machine is MFX-1300, skip to step 7.

Press ENTER. The machine asks you to select a resolution:

Press to ENTER to save the setting.

Network Settings

** Complete **

Resolution :400dpi





/Enter

Contrast :Normal





/Enter

Doc. Type :Text





/Enter

Network Settings

01 Scan Parameters

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 115 116

No comments

Muratec OFFICEBRIDGE ONLINE User Manual Page 42