Muratec MFX-1700 Specifications download pdf (Page 127)

4-5

4.11 Clearing Jammed Paper

If the original document jams

1. If an original document jams in the ADF while scanning the document into the memory for faxing or

copying, the LCD will show:

Document Jam

ContStor Enter/Cancl

If you do wish to continue the operation, press ENTER and proceed to step 2.

To abort the operation, press CANCEL. This will erase from memory all pages stored during this

operation, and the machine will return to standby mode.

Important: If you wait more than 60 seconds without pressing any key, the machine will erase from

memory all pages stored during this operation and the machine will return to the standby

mode.

Note: If the document jammed in the following case, the following message will appear and the

machine will abort the operation anyway; instead, you’ll have to perform the job again from

scratch.

• The first page of the document jammed

• During the real time transmission or quick memory transmission

• During non-sorting ADF job

Open&Close ScanCover

Reset Document

Also, the “Repeat transmission. Error on scan at page xx” message will be printed out if the

document jammed during transmission.

2. The LCD will show which page (i. e., which page number) is jammed. To continue scanning from the

jammed page forward (keeping in mind the Note at the end of step 1, above), press START after

clearing the jam.

P 2.Reset Document

Press Start Key

Note: If you wait more than 60 seconds without pressing any key, the machine will begin to send or

copy the document(s) it has.

If you wish to cancel this operation, press STOP. The machine will delete all pages from memory and

then return to its standby mode.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 231 232

No comments

Muratec MFX-1700 Specifications Page 127