Muratec MFX-1330 Specifications download pdf (Page 129)

3-101

4. Select the paper size to test.

Paper Size :A4

/ /Enter

5. Press or until the desired size is displayed.

6. Press ENTER.

Pattern B

** Printing **

The selected pattern will be printed continuously.

Note: Press STOP to stop printing.

7. To select another pattern, repeat the steps 1 to 6.

3.10.3 Feeder test

The feeder test discharges all documents in the automatic document feeder at a constant speed and displays

the document total in the LCD.

1. Load test documents into the automatic document feeder.

2. Press MENU, *, 0, 9,

twice, then press ENTER.

Feeder Test

/ /Enter

3. Press START to start the feeder test.

4. Press STOP to exit the test mode.

3.10.4 Port Status

This test mode is not applicable to field service of this machine.

3.10.5 Set Background Level

The background level is an established threshold used to help measure the reflective ability of a scanned

document. This threshold can change if the scanner lamp, CCD, or the ballast is replaced; therefore this

mode should be used to reset the threshold when these items are changed.

The Set Background Level mode allows the level to be set without erasing memory contents.

Note: The background seal at the inside of the scanner cover should be cleaned prior to setting the

background level to ensure an accurate reading.

1. Press MENU, *, 0, 9,

four times, then press ENTER.

Set Background Level

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 289 290

No comments

Muratec MFX-1330 Specifications Page 129