Muratec MFX-1330 Specifications download pdf (Page 177)

4-15

4.13 LCD Error Messages

Your fax machine’s LCD messages can help you spot problems.

LCD error messages (Alphabetic list)

What you see on the LCD What it means/What to do

All Commands In Use Your fax machine has all of its 99 possible delayed commands (automatic

redialing counts as one) stored in memory and cannot accept another.

Wait until your fax has completed one of the delayed commands or delete an

existing command by using REVIEW COMMANDS.

Already Stored You tried to enter the same fax (or phone) number which is already entered

in your fax machine.

Enter a different fax (or phone) number.

Box In Use You tried to erase a F-Code box which contains at least one document.

Erase the document(s), then try again.

Call For Service The scanner lamp is dim or inoperable. Make repeated copies to help

evaporate any internal moisture.

See page 4-21.

Change to Fax Mode You tried to to store the document for polling (or for F-Code Box) when the

machine is in the Copy mode. You can store the fax document only when

the machine is in the Fax mode.

Check Memory Tx You tried to turn the Fax&Copy feature on, but the memory transmission

setting is off. To use the Fax&Copy feature, the memory transmission

setting must be set to on.

Set the Memory Tx to on, then try again.

Check Paper Size The difference sized paper which is not same sized paper you told your

Open&Close Top Cover sized paper you told your machine is loaded.

Set correct sized paper or change the paper size setting.

Close XXX Cover The cover indicated on the LCD is open or has not been closed securely.

Close it properly.

Close 1st Cassette The paper cassette indicated on the LCD is open or has not been

Close 2nd Cassette closed securely.

Close it properly.

Communication Error A communication error disrupted the reception or transmission.

If you were transmitting, press stop to clear the error message and then re-

try the transmission. If you were receiving a fax, try to contact the other

person and have him/her re-try the transmission. (The problem may be

entirely with his/her machine, phone line, etc.)

Copy Off You tried to change your fax machine to the copy mode, but the unit’s copy

protection feature is on, preventing such use.

Turn off copy protection.

Department Code Full You tried to enter department code more than 100. Your machine can store

up to 100 department codes.

Document Full You tried to enter an document into an F-Code box, but the machine has

reached its capacity.

Delete documents stored in F-Code boxes until the machine will let you

proceed.

Document Jam An original document jam while you are using the ADF for either faxing

ContStor Enter/Cancl or copying.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 289 290

Comments to this Manuals

No comments

Muratec MFX-1330 Specifications Page 177

Comments to this Manuals

Related products and manuals for Multifunctionals Muratec MFX-1330