© All rights reserved, Easy Group, LLC. Version 6.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
105
Please be advised that some toner rell kits may be
compatible with multiple toner cartridges.
CLICK HERE TO GO THE INDEX
REQUIRED FOR A SUCCESSFUL REFILL:
Toner
1 funnel
General Relling Procedures:
Use a athead screwdriver to carefully pop out the large plastic plug found on the side
of the side of the cartridge.
IMPORTANT: If any toner is inside the cartridge before relling, please dispose of
it properly (example: trash can). For best results, try disposing as much of the OEM
toner as possible, or try using as much of it so that it doesn’t go to waste.
Before opening the bottle of toner, turn it upside down and tap it on a table to loosen the
toner and allow it to ow freely. Remove the cap and pull the seal off the bottle. Attach
the funnel cap making to sure it is on tightly. Tilt the funnel cap toward the lling hole
and begin to ll. If the toner stops owing before the cartridge is full, simply remove
the toner, close the cap, turn the bottle upside down and tap it on a table. Once the car-
tridge is full, seal the hole with the plug by twisting it until it is completely seated. Now
gently shake the cartridge side to side to distribute the toner.
RICOH CL3500
Remove plug carefully and Rell here
Comments to this Manuals