Muratec M-1900 User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
© All rights reserved, Easy Group, LLC. Version 6.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
20
Please be advised that some toner rell kits may be
compatible with multiple toner cartridges.
CLICK HERE TO GO THE INDEX
DELL 3100 / Epson C1100 (CX11) / XEROX C525A
Note: Always rell in a well ventilated environment, preferably outside or at a workbench
1. Use a small at-head screwdriver
to lift the tap over the stopper and
allow you to turn the blue end
piece counterclockwise (color of
end piece varies on color of
cartridge).
2. This is the starting point.
3. Turn the cap until the tab
comes to a complete stop
and has entered under the
blue cap.
TROUBLESHOOTING:
If the Dell 3100 printer does not recognize the relled cartridge, follow these steps:
1) Restart the printer by turning it off for 2-3 minutes, then turning it back on
2) After the printer has restarted, take out the cartridge and shake it and reinstall it
3) If these steps don’t work, try removing waste toner from the waste hopper. The reason for this is because if the machine sees too
much toner in the waste hopper, it may think the cartridge is empty.
4. Now pull the cap, out away
from the cartridge..
5. Remove the carrier ll plug.
6. This is the waste carrier chamber,
empty it out and you will nd the
toner ll plug. Remove it to clean
cartridge and ll toner..
NOTE: Mix toner and carrier in the same
toner bottle before relling the
toner hopper.
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 141 142

Comments to this Manuals

No comments