© All rights reserved, Easy Group, LLC. Version 6.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
92
Please be advised that some toner rell kits may be
compatible with multiple toner cartridges.
CLICK HERE TO GO THE INDEX
KONICA MINOLTA PAGE PRO 1400W
Toner Hopper Plug
REQUIRED FOR A SUCCESSFUL REFILL:
Toner
1 funnel cap
1 replacement chip
General Relling Procedures:
1. First you need to locate the plastic SEALING PLUG similar to the one shown in this pic-
ture to the right.
2. Once the plastic sealing plug is viewable, slowly and gently, pry the SEALING PLUG
away from the cartridge using a at screwdriver – this reveals the lling hole.
3. Remove any toner left in the cartridge before relling the cartridge.
4. Rell by pouring toner into the ll hole through the nozzle attached to the toner bottle.
5. Replace the plug when nished reling
6. This cartridge has a MEMORY CHIP which needs to be replaced in order for the printer
to sense that there is toner in the cartridge. Simply remove the old chip by unscrewing the
2 screws that hold it in place, and screw the new replacement chip in its place. Please be
aware that the replacement chip may have one hole compared to the original. Make any
needed modications to t the chip in place.
Remove original chip, replace with new
chip.
Comments to this Manuals