© All rights reserved, Easy Group, LLC. Version 6.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
79
Please be advised that some toner rell kits may be
compatible with multiple toner cartridges.
CLICK HERE TO GO THE INDEX
Lexmark -
17G0152, 17G0154, 4K00198, 4K00199
12A5740, 1382625, 1382925, 1382929
12A5745, 12A5840, 12A5845, 12A5849
make
hole
REQUIRED FOR A SUCCESSFUL REFILL:
Toner
1 funnel cap
1 hole plug
Toner Hole Making Tool
General Relling Procedures:
1. Remove the label on the front of the cartridge.
2. Make a hole using the hole making tool (read general instructions on how to use the
hole making tool).
3. Rell by pouring toner into the ll hole through the nozzle attached to the toner
bottle. Make sure that you ll using only 1/3 of the toner or less! You can rell again
and again, but never put more than 1/3 of toner at one time.
4. Seal the hole using the sealing plug provided.
5. The smartchip needs to be replaced before the printer will recognize the relled
cartridge. If you do not have a smartchip please check with your place of purchase or
the cartridge, and apply the new one in its place (the chip has adhesive backing).
Comments to this Manuals