© All rights reserved, Easy Group, LLC. Version 6.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
90
Please be advised that some toner rell kits may be
compatible with multiple toner cartridges.
CLICK HERE TO GO THE INDEX
LEXMARK e250 / 350 / 450
REQUIRED FOR A SUCCESSFUL REFILL:
Toner
1 funnel cap
1 replacement chip
General Relling Procedures:
1. First you need to locate the plastic SEALING PLUG similar to the one shown in
this diagram. Some cartridges may require you to remove a plastic cover that lays over
tthe cartridge.
2. Once the plastic sealing plug is viewable, slowly and gently, pry the SEALING
PLUG away from the cartridge using a athead screwdriver – this reveals the lling hole.
3. Rell by pouring toner into the ll hole through the nozzle attached to the toner
bottle.
4. Replace the plug when nished relling
5. This cartridge has a MEMORY CHIP which needs to be replaced in order for the
printer to sense that there is toner in the cartridge. Simply remove the old chip by
unscrewing the 2 screws that hold it in place, and screw the new replacement chip in
its place.
Chip Replacement
To replace the chip, simply unscrew the chip from its place holder
discard of it properly, and replace it with the new one.
Comments to this Manuals