Muratec MFX-1500 User Manual download pdf (Page 108)

eyon

as cs

2.63

Use the numeric keypad to enter the number

exactly

as your machine

should dial it, including whatever codes your phone system may require.

The number can be up to 40 characters in length:

78:Fax Number

9-5558422_

Your display can show only 20 characters at a time. To view characters

beyond those 20 (such as with an international long-distance numbers),

press

to scroll leftward or to scroll rightward.

Important:

Do not

press

ENTER

Note: If you make a mistake or want to erase characters entered in a

previous setting, press

CANCEL

to erase leftward. Or, if you want

to change just one character in the number, press

to move the

cursor leftward, or

to move it rightward, to that character and

press

CANCEL

to erase it. Then re-enter until the number is just as

you want it.

Now,

while you still can see the fax number on the display

, press

COMMUNICATION OPTIONS

two times

and then press

ENTER

. The

display shows:

S Mail Tx

S Mail No. _

Use the numeric keypad to enter the appropriate one-digit SecureMail

mailbox number. In this example, the number is

S Mail Tx

S Mail No. 5_

When the entry is complete, press

ENTER

If you want the transmission to begin

immediately

every time you press

the key, press

ENTER

again and skip to step 11.

If you want to

delay

the transmission (perhaps to take advantage of lower

phone rates), press

COMMUNICATION OPTIONS

ENTER

There’s a choice to make. Instruct your fax to carry out this delayed

command in

one

of the following ways:

Option 1: Perform the command

once

at a certain time on a certain day of

the month (For example, “Do this at 5:05

on the 30th.”)

To select this option, use the numeric keypad to enter the

date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time

each day you press

the key

. (For example, “Do this at 5:05

today.”)

To select this option, use the numeric keypad to enter

(

i. e., 00

), and then the time when the fax could perform

the command:

Delayed

Enter Time: 00/17:05

10.

Press

ENTER

11.

The display now shows the next programmable one-touch key.

If you

do not

wish to enter or change

any other

key’s programming, press

STOP

to return your machine to its usual standby mode.

If you

wish to enter or change this key’s programming, go back to step 3.

If you wish to enter or change

another

key’s programming, go back to

step 2.

Programming a relay broadcast initiation

Note: To

erase

a programmable one-touch key, refer to page 2.70.

Note: For this operation to work, three things must be true:

• The remote fax machine must be a Muratec fax machine (other than

an F-86) with “hub” capability.

• The call group(s) to which you’re faxing must exist on the

remote machine.

• You must know the two-digit mailbox number for each call group to

which you’re faxing.

To program a relay broadcast initiation into a programmable one-touch key:

Change to the Fax mode then press

PROGRAM

ENTER

. The display

either shows:

Select Program No.

73:No Number Stored

. . . or indicates a command already is programmed into this key.

is the key you want to program, skip to step 4. (However, our

examples from here will say

“77”

rather than

“73.”

Select the key in which you want to program a command or change a

previously stored command — if necessary, turn the fliptab to see it, as

described earlier — and then press it. Here, we’ve selected

Select Program No.

77:No Number Stored

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 108

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500