Muratec MFX-1500 User Manual download pdf (Page 110)

eyon

as cs

2.65

Programming regular and database polling

Note:

erase

a programmable one-touch key, refer to page 2.70.

Note:

For database polling to work, three things must be true:

• The remote fax must be a memory-equipped Muratec fax (other than an

F-76, F-85 or F-86) with a file stored in its database memory and ready

for polling.

• The database file which you’re polling must exist on the remote fax.

• You must know the one- or two-digit file number for each database file

you wish to poll.

Note:

You cannot program

continuous

polling into a programmable one-touch

key. For more information on continuous polling, see page 2.32.

To program a polling operation, whether regular or database, into a programmable

one-touch key:

Change to the Fax mode then press

PROGRAM

ENTER

. The display

either shows:

Select Program No.

73:No Number Stored

. . . or indicates a command already is programmed into this key.

is the key you want to program, skip to step 4. (However, our

examples from here will say

“76”

rather than

“73.”

Select the key in which you want to program a command or change a

previously stored command — if necessary, turn the fliptab to see it, as

described earlier — and then press it. Here, we’ve selected

Select Program No.

76:No Number Stored

If you change your mind and wish to select a different programmable one-

touch key, go back to step 2

before

going on to step 4.

Press

ENTER

. The display now shows either:

76:Fax Number

9-5557312_

Use the numeric keypad to enter the number

exactly

as your machine

should dial it, including whatever codes your phone system may require.

The number can be up to 40 characters in length:

76:Fax Number

9-5550629_

Your display can show only 20 characters at a time. To view characters

beyond those 20 (such as with an international long-distance numbers),

press

to scroll leftward or to scroll rightward.

Important:

Do not press

ENTER

Note:

If you make a mistake or want to erase characters entered in a

previous setting, press

CANCEL

to erase leftward. Or, if you want

to change just one character in the number, press

to move the

cursor leftward, or

to move it rightward, to that character and

press

CANCEL

to erase it. Then re-enter until the number is just as

you want it.

Now,

while you still can see the fax number on the display

, press

COMMUNICATION OPTIONS

four times

and then press

ENTER

The display shows:

Polling

File No. _

If you’re performing regular (

not

database) polling, press

ENTER

and skip

to step 8.

Use the numeric keypad to enter the one- or two-digit identifier for each

database file you want to poll. You can specify up to 10 files; between the

entry of each new file, press

COMMUNICATION OPTIONS

to insert a comma

but

do not

insert a comma after the

last

file number.

For example, here, we’ve entered

COMMUNICATION OPTIONS

(the letter in

preparation for another file number):

Polling

File No. 6,27,28_

Note:

The display shows only seven characters of the file number.

Important:

Again,

do not

insert a comma after the last file number.

When the entry is complete, press

ENTER

If you want the polling to begin

immediately

every time you press the key,

press

ENTER

again and skip to step 11.

If you want to

delay

the polling (perhaps to take advantage of lower phone

rates), press

COMMUNICATION OPTIONS

ENTER

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 110

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500