Muratec MFX-1500 User Manual download pdf (Page 88)

Beyond the basics

2.43

Dialing from the numeric keypad while using the

mask

Note:

If the

mask feature is off, you dial normally.

If you’ve specified “Mode1” — use “star” power

Enter the phone number, then press the * (“star”) key and enter the

The

always goes last.

For example, to dial

19725550911

with a

of “123456,” enter

19725550911*123456

Press Start

19725550911*123456

Press

START

. The

disappears from the display, and your machine dials the

desired phone number.

If you’ve specified “Mode2” — the machine guides you

Enter the phone number as usual.

Press Start

19725550911_

Press

START

. The display now shows:

Enter PIN Number

Use the numeric keypad to enter the

Enter PIN Number

123456_

Press

START

. Your machine will dial the number.

Performing batch transmission while using the

mask

Note:

The following instructions presume you are familiar with how to set and use both

your machine’s autodialer and its batch transmission feature. If you need to review,

see pages 2.8–2.16 for more on the autodialer and/or pages 2.24–2.27 for more on

batch transmission.

Note:

If the

mask feature is off, you dial normally.

If you’ve specified “Mode1” or “Mode2”

Important:

Any autodialer number you use with batch transmission

must

include the

. (To review how to include this information in an autodialer number,

review the Mode 1 instructions under “Autodialing while using the

mask,” page 2.42.)

Before sending a batch transmission to a desired number the first time, you must store the

within its batch box. Here’s how:

Perform the batch box setting until you’ve entered the batch box number.

The display now asks for the fax number (here, we’ve working with

batch box 1):

1:Fax Number

Enter an autodialer number, or use the numeric keypad to enter the fax number, to

which the batch transmission should go.

Important:

If you’re using an autodialer number, it must contain the

, as

mentioned previously.

If you’re entering a number from the numeric keypad, enter the fax

number, followed by the * (“star”) key and then

Press

ENTER

to save the setting.

Note:

If you press

ENTER

without entering the

, the fax machine beeps,

indicates “No

Number” on the display and then returns you to step 2.

Now, you can perform batch transmission to this box while the

mask

is activated.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 88

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500