Muratec MFX-1500 User Manual download pdf (Page 113)

eyon

as cs

2.68

12.

There’s a choice to make. Instruct your fax to carry out this delayed

command in

one

of the following ways:

Option 1: Perform the command

once

at a certain time on a certain day of

the month (For example, “Do this at 5:05

on the 30th.”)

To select this option, use the numeric keypad to enter the

date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time

each day you press

the key

. (For example, “Do this at 5:05

today.”)

To select this option, use the numeric keypad to enter

(

i. e., 00

), and then the time when the fax could perform

the command:

Delayed

Enter Time: 00/17:05

13.

Press

ENTER

14.

The display now shows the next programmable one-touch key.

If you

do not

wish to enter or change

any other

key’s programming, press

STOP

to return your machine to its usual standby mode.

If you

wish to enter or change this key’s programming, go back to step 3.

If you wish to enter or change

another

key’s programming, go back to step 2.

Programming F

Code polling

Note: To

erase

a programmable one-touch key, refer to page 2.70.

Note: For F-Code polling to work, two things must be true:

• The document which you’re polling must exist on the remote machine

in an F-Code box.

• You must know the remote fax’s

ITU

subaddress and (if applicable)

password number for each box you wish to poll.

To program a F-Code transmitting operation into a programmable one-touch key:

Press

PROGRAM

ENTER

. The display either shows:

Select Program No.

73:No Number Stored

. . . or indicates a command already is programmed into this key.

is the key you want to program, skip to step 4. (However, our

examples from here will say

“74”

rather than

“73.”

Select the key in which you want to program a command or change a

previously stored command — if necessary, turn the fliptab to see it, as

described earlier — and then press it. Here, we’ve selected

Select Program No.

74:No Number Stored

If you change your mind and wish to select a different programmable one-

touch key, go back to step 2

before

going on to step 4.

Press

ENTER

. The display now shows either:

74:Fax Number

9-5557312_

Use the numeric keypad to enter the number

exactly

as your machine

should dial it, including whatever codes your phone system may require.

The number can be up to 40 characters in length:

76:Fax Number

9-5550629_

Your display can show only 20 characters at a time. To view characters

beyond those 20 (such as with an international long-distance numbers),

press

to scroll leftward or to scroll rightward.

Important: Do not press

ENTER

Note: If you make a mistake or want to erase characters entered in a

previous setting, press

CANCEL

to erase leftward. Or, if you want

to change just one character in the number, press

to move the

cursor leftward, or

to move it rightward, to that character and

press

CANCEL

to erase it. Then re-enter until the number is just as

you want it.

Now,

while you still can see the fax number on the display

, press

COMMUNICATION OPTIONS

eight times. The following display appears:

8.F-Code Polling

Comm.Option/Enter

Press

ENTER

. The display will show:

Enter Sub-Address

Use the numeric keypad to enter the

ITU

sub-address for each box

(

i. e.,

ITU

subaddress number) you want to poll.

For example, here, we’ve entered

123456

Enter Sub-Address

123456_

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 113

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500