Muratec MFX-1500 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Getting started
1.12
Attach the paper-handling parts
1.
Attach the
document tray
by
inserting it into the appropriate
holes, as shown.
2.
Attach the
Multipurpose
tray
by inserting its two
pegs at a slightly upward
angle into the
appropriate holes, as
shown.
3.
Attach the
paper tray
by inserting its two
pegs at a slightly
upward angle into the
appropriate holes,
as shown.
Attaching an optional handset
You may purchase an optional handset for your fax machine. Here is how to attach
the handset.
Important:
Do not
connect the handset directly to a telephone
wall
jack. Instead,
connect it only to your fax, as these instructions describe.
1.
Remove the two screw caps and
screws.
2.
Using a Phillips-head
screwdriver, attach the
handset
cradle
to the rear side of your
machine, using the screws
included with the cradle.
3.
Plug one end of the handset cord
(it’s curled) into the
PHONE
1
jack
on the left of your machine.
4.
Plug the other end of the handset
cord into the jack on the handset.
If connected to a phone line, your
fax machine is now “off-hook.
Note:
The handset has a small
“flash” button which you
can press while holding
the handset, putting the
fax machine back “on-
hook” until you can hang up the handset properly in step 5.
5.
Place the telephone handset onto the handset cradle. The cradle will press
the handset’s “flash” button, hanging up the handset.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 146 147

Comments to this Manuals

No comments