Muratec MFX-1500 User Manual download pdf (Page 42)

Getting started

1.33

COPY FAX

When using the

FBS

If necessary, press

COPY

FA X

to change to Copy mode.

Otherwise, proceed to step 2.

Open the book cover, place your document

face down

on the

FBS

and align it with the scale on the right.

Note:

Be sure that you place the original document on the

FBS

in the same orientation as the paper in the paper source (which

you’ll select in step 4, below).

Gently

close the book cover.

Press

PAPER SIZE

to select recording paper (see page 1.31).

Adjust resolution and contrast if necessary.

Press

RESOLUTION

to change the resolution.

Press

CONTRAST

, then press or

to change the contrast.

Note:

For copying, your

only resolution

choices are either

superfine or halftone

mode.

Set the reduction or enlargement rate, if you want. (See “Setting of

enlargement or reduction for copying,” page 1.34.)

If you want to make only one copy of each page of the document, skip to

step 10. Otherwise, proceed to step 8.

Use the numeric keypad to enter the desired number of copies for each

page in the document. You may choose one to 99 copies. Here, we’ve

entered “03” to choose a setting of three copies.

Copy Ready Num: 3

C1:LTR 100%

Note:

For fewer than 10 copies, enter a leading zero before the digit —

e. g.,

“03” (although, as shown above, the zero will not appear in

the final display.)

Press

SORT COPY

once or twice to “Toggle” (switch on or off) the sorting of

copies, as desired.

10.

Press

START

to begin the copying process.

Note:

To stop the copying before it is through, press

STOP

Note:

Thanks to your machine’s

QuadAccess

feature (see page 2.35 for more),

copying doesn’t keep you incommunicado while in progress: you can start a

fax or voice call and even receive a

voice

call during copying.

When using the Multipurpose tray

When you need to use a size of paper not currently loaded in your machine’s paper

cassette(s), or when you want to use a special

type

of paper (such as transparency

film), use the Multipurpose tray.

Important:

If loading transparency (OHP) film into the multipurpose tray, be sure

that the sheet is designed for

laser printers

and

not

for copiers. Also,

be sure that the film

does not

have a paper backing and/or a leading

strip. If it does, remove the paper backing and/or strip before

inserting. Only film should go in, not film with any backing or strip.

Either insert the document in the

ADF

or place it on the

FBS

Place a sheet of printout paper on the

Multipurpose tray.

Then align the paper guides to the

sheet’s edges and insert the sheet

until it comes to a stop.

Note:

Place the original

document in the same

orientation as the paper in

the paper source (which

you’ll select in step 5,

•

If you are going to make more than one copy, you should insert the

printout paper only one page at a time.

•

You may use letter-, legal- or half-letter sized paper. (Half-letter is

8.5″ wide × 5.5″ tall.)

Number of copies

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 42

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500