© All rights reserved, Easy Group, LLC. Version 6.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
101
Please be advised that some toner rell kits may be
compatible with multiple toner cartridges.
CLICK HERE TO GO THE INDEX
OKIDATA C3400
A.
B.
D.
F.
C.
REQUIRED FOR A SUCCESSFUL REFILL:
Toner
1 funnel cap
1 replacement chip
1 at-head screwdriver
Note: Please read carefully before relling cartridge.
General Relling Procedures:
Using the at-head screwdriver, press gently on the tab as shown in picture A to release
the end-cap and turn (the end-cap) clockwise so that the tab arrives to the second slot
as seen in picture B (some remaining or excess toner can and may fall out of the car-
tridge).
Before opening the bottle of toner, turn it upside down and tap it on a table to loosen the
toner and allow it to ow freely. Remove the cap and pull the seal off the bottle.
Attach the funnel cap or use a 5mm straw, by making proper adjustments to the bottle
cap, to ll the cartridge with toner. If you nd it difcult to rell with the funnel cap,
you can create another funnel with newspaper or printing paper to help lead the toner
into the small opening of the toner hopper. Picture C shows the cartridge being relled
with the 5mm straw. Do not over rell the cartridge, the C3400 can be relled up to
2 times with the Okidata C5100 universal toner kit and up to 4 times with the Okidata
C9000 universal toner kit. Once you have nished relling the cartridge, work your
way backwards thru step A and B to close the toner hopper opening.
After you are nished relling replace the chip as shown in picture D and F.
Comments to this Manuals