Muratec MFX-1500 User Manual Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
Just in case . . .
3.
6
Printouts have irregularities
The paper you’re using may have absorbed moisture,
perhaps due either to high humidity or water having been
spilled on the paper supply at some point. Toner will not
adhere well to paper at the location where the paper has
been wet.
Replace the paper with dry paper and re-try the printing.
Printouts have white and/or black lines
The toner cartridge or drum cartridge may be defective.
Remove and check the cartridge for damage.
If the problem persists, replace either or both of the
cartridges as indicated.
The charger may be dirty.
Your machine normally cleans the charger automatically.
If other solutions fail, please contact your authorized
Muratec dealer or call Muratec Customer Support
.
Printouts have toner smudges
The toner may be unevenly distributed inside the toner
cartridge.
Remove the toner cartridge and shake it a few times to
redistribute the toner inside. If the problem persists, replace
the cartridge.
The toner cartridge or drum cartridge may be defective.
Remove and check the cartridges for damage. If the problem
persists, replace either or both of the cartridges as indicated.
If you find smudges on the back of the printouts, the
transport roller may be dirty.
Your machine normally cleans the transport roller
automatically. If other solutions fail, please contact your
authorized Muratec dealer or call the Muratec Customer
Support Center at [972]364-3350.
Printouts have white spots
The charger may be dirty.
Your machine normally cleans the charger automatically. If
other solutions fail, please contact your authorized Muratec
dealer or call the Muratec Customer Support Center at
(972) 364-3350.
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 146 147

Comments to this Manuals

No comments