Muratec MFX-1500 User Manual download pdf (Page 112)

eyon

as cs

2.6

The display now shows the next programmable one-touch key.

If you

do not

wish to enter or change

any other

key’s programming, press

STOP

to return your machine to its usual standby mode.

If you

wish to enter or change this key’s programming, go back to step 3.

If you wish to enter or change

another

key’s programming, go back to step 2.

Programming F

Code transmission

Note:

erase

a programmable one-touch key, refer to page 2.70.

Note:

For F-Code transmission to work, two things must be true:

• You must know how the remote fax is using each F-Code (

ITU

standard sub-addressing/password) box to which you’re transmitting —

as a bulletin box or as a security box (obviously, different makers may

use slightly different terms, but the concepts are the same).

• You must know the remote fax’s

ITU

subaddress and password number

for each box to which you wish to transmit.

To program a F-Code transmission into a programmable one-touch key:

Change to the Fax mode then press

PROGRAM

ENTER

. The display

either shows:

Select Program No.

73:No Number Stored

. . . or indicates a command already is programmed into this key.

is the key you want to program, skip to step 4. (However, our

examples from here will say

“74”

rather than

“73.”

Select the key in which you want to program a command or change a

previously stored command — if necessary, turn the fliptab to see it, as

described earlier — and then press it. Here, we’ve selected

Select Program No.

74:No Number Stored

If you change your mind and wish to select a different programmable one-

touch key, go back to step 2

before

going on to step 4.

Press

ENTER

. The display now shows either:

74:Fax Number

9-5557312_

Use the numeric keypad to enter the number

exactly

as your machine

should dial it, including whatever codes your phone system may require.

The number can be up to 40 characters in length:

76:Fax Number

9-5550629_

Your display can show only 20 characters at a time. To view characters

beyond those 20 (such as with an international long-distance numbers),

press

to scroll leftward or to scroll rightward.

Important:

Do not press

ENTER

Note:

If you make a mistake or want to erase characters entered in a

previous setting, press

CANCEL

to erase leftward. Or, if you want

to change just one character in the number, press

to move the

cursor leftward, or

to move it rightward, to that character and

press

CANCEL

to erase it. Then re-enter until the number is just as

you want it.

Now,

while you still can see the fax number on the display

, press

COMMUNICATION OPTIONS

seven times. The following display appears:

7.F-Code Tx

Comm.Option/Enter

Press

ENTER

. The display will show:

Enter Sub-Address

Use the numeric keypad to enter the

ITU

sub-address for the box to

which you want to send the document. Here, we’ve entered

123456:

Enter Sub-Address

123456_

Press

ENTER

. The display will show:

Enter Password

Note:

If you know that this sub-address does

not

have a password, skip

to step 11.

10.

Use the numeric keypad to enter the appropriate

ITU

password for the

box (if there is one; if there’s not, you may skip to step 11, as explained in

the second

Note,

below). In this example, we’ve entered

654321

Enter Password

654321_

Note:

If you make a mistake, press

CANCEL

to back up, then enter the

correct number.

When the entry is complete, press

ENTER

11.

If you want the transmission to begin

immediately

every time you press

the key, press

ENTER

again and skip to step 14.

If you want to

delay

the transmission (perhaps to take advantage of lower

phone rates), press

COMMUNICATION OPTIONS

ENTER

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 112

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500