Muratec MFX-1500 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
Getting started
1.13
Attaching a second phone
Want to attach a second phone (even a cordless model!) to your fax machine, so
they can share the same phone jack? No problem.
Before we go further, lets explain the idea. You’re plugging the second phones
phone line into your fax machine’s
PHONE
2
jack, not the wall phone jack. In such a
setup, only your fax machine connects to the wall. The second phone receives
phone signals through your fax machine.
Now, let’s proceed
1.
If your second phone is already plugged into a wall phone jack, disconnect
it from that jack, at the jack.
Hold onto the phone plug; you’ll need it in
step 2.
Note:
Of course, if your second
phone is a model which
also requires
AC
power,
as is true for the base of a
cordless phone,
don’t
unplug it from its
AC
power jack!
2.
Using the plug mentioned in
step 1, plug the phone cable from
your second phone into the
PHONE
2
jack on the left side of
your fax machine.
For information on how to use a connected second telephone with your fax
machine, see “Receiving faxes,” beginning on page 1.29.
Loading paper
Of course, one of your fax machine’s most outstanding features is how it prints
faxes and makes copies on plain paper! Now, everything that comes out of your fax
machine is ready for distribution or archiving, right from the start.
The following instructions tell you how to load the paper on which the fax machine
makes its printouts — copies and received faxes. Your machine’s standard paper
cassette can hold up to 400 sheets at a time. (Each optional cassette can hold up to
200 sheets.)
Loading the paper cassette
Before you load paper, note the following:
The paper cassette can be adjusted to accept letter- or legal-sized paper.
Before you load the cassette, you will need to “tell” your fax machine which size
of paper, letter- or legal-sized, you will be loading. You can do this by setting a
pin located on the rear side of the paper cassette.
Note:
If you will be using letter-sized paper, there’s no need to adjust the
cassette; your fax is initially set for this paper size. Simply attach the
LTR
sticker to the outside of the paper cassette.
1.
Pull the paper cassette
completely out of
your fax.
2.
On the rear side of the cassette, you will see the pin and three sets of holes.
Note the drawing below. If the pin is in the
upper
and lower set of holes,
your fax “thinks” the cassette holds
letter
-sized paper. If the pin is in the
middle
and lower holes, your fax thinks the cassette has
legal
-sized paper.
Press here to
release the cassette
Letter size Legal size
Spare pin
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 146 147

Comments to this Manuals

No comments