Muratec MFX-1500 User Manual download pdf (Page 31)

Getting started

1.22

To adjust the contrast setting, press ,

CONTRAST

To light up an overly dark document, press

To darken an overly weak document, press

Here are the possible settings:

Set Contrast

Light Dark

Light

— Lightens up overly dark originals.

Set Contrast

Light Dark

Provides some lightening of originals.

Set Contrast

Light Dark

Normal

— Suited to most documents.

Set Contrast

Light Dark

Provides some darkening of originals.

Set Contrast

Light Dark

Dark

— Darkens weak, “washed-out” images.

Note: Until you become accustomed to using the Light and Dark settings, you

might tend to confuse them. Just remember what we say above — “Light

lightens” and “Dark darkens” — to keep it straight!

Entering a pause character when dialing

Your fax machine provides

special dialing characters

which you may find useful.

We’ll discuss most of them later (see page 2.8), but you may need to know now

about the

pause character.

Some long-distance systems require dialing pauses, and

pauses also can be useful when you’re dialing through special telephone exchanges.

To insert a pause character, just press

REDIAL

PAU SE

(after you’ve dialed at least one

other character). The display will show

(the pause character). Each pause you

enter lasts for a factory-set five seconds (see “Changing the pause length,” right

column

for how to change this setting). For example, assuming the pause is at the

factory setting, pressing

REDIAL

PAU SE

1 9 7 2 4 0 3 2 0 0 9

dials

9 [5-second

pause] 19724032009.

Important: Each pause uses two of the characters you’re allowed in a number.

Changing the pause length

The pause is set by the factory to last five seconds, but you can set it to last as long

as ten seconds if necessary.

If you find the five-second pause is satisfactory when

you use it with your phone system,

do not

make this change.

But, if you must:

If the machine is in Fax mode, proceed to step 2.

If it is in Copy mode, press

COPY

FA X

to change to Fax mode.

Press

PROGRAM

, 0, 4,

ENTER

Set Dialing Pause

Time (05-10): 05

If the setting you see is acceptable, skip to step 4.

Otherwise, proceed to step 3.

Use the numeric keypad to enter the desired length of the dialing pause.

Here, we’ve chosen nine seconds.

Set Dialing Pause

Time (05-10) 09

Note: The length setting requires two digits, so there always must be a leading

zero for lengths other than 10 seconds.

Press

ENTER

to save the setting.

Potential problems with call-waiting and voice mail

Telephone call-waiting signals can stop fax transmission and reception. And, of

course, any service — such as voice mail — which may intercept your calls can

keep your fax machine from getting fax calls. If you must use only one phone line,

please consult your telephone company for information on how you can temporarily

disable call-waiting or voice mail while using the fax machine.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 31

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500