Muratec MFX-1500 User Manual download pdf (Page 111)

eyon

as cs

2.6

There’s a choice to make. Instruct your fax to carry out this delayed

command in

one

of the following ways:

Option 1: Perform the command

once

at a certain time on a certain day of

the month (For example, “Do this at 5:05

on the 30th.”)

To select this option, use the numeric keypad to enter the

date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time

each day you press

the key

. (For example, “Do this at 5:05

today.”)

To select this option, use the numeric keypad to enter

(

i. e., 00

), and then the time when the fax could perform

the command:

Delayed

Enter Time: 00/17:05

10.

Press

ENTER

11.

The display now shows the next programmable one-touch key.

If you

do not

wish to enter or change

any other

key’s programming, press

STOP

to return your machine to its usual standby mode.

If you

wish to enter or change this key’s programming, go back to step 3.

If you wish to enter or change

another

key’s programming, go back to step 2.

Programming batch transmission

Note: To

erase

a programmable one-touch key, refer to page 2.70.

Note: For this operation to work, two things must be true:

• The batch box must exist on your machine. (If necessary, see “Creating

or modifying a batch box,” pages 2.24–2.25.)

• You must know the batch box’s one-digit number (

1–5

To program a batch transmission into a programmable one-touch key:

Change to the Fax mode then press

PROGRAM

ENTER

. The display

either shows:

Select Program No.

73:No Number Stored

. . . or indicates a command already is programmed into this key.

Note: To program a key into which a command other than batch

transmission has already been programmed, you must first erase

the key (see page 2.70). Then, return to these instructions and

select that key.

If a batch transmission is already programmed into this key, you

can

change the batch box number, in step 6. (But you can’t

change the key to another kind of command. To do that, you must

first erase the key and

then

program that key as described

elsewhere in this section.)

is the key you want to program, skip to step 4. (However, our

examples from here will say

“75”

rather than

“73.”

Select the key in which you want to program a command or change a

previously stored command — if necessary, turn the fliptab to see it, as

described earlier — and then press it. Here, we’ve selected

Select Program No.

75:No Number Stored

If you change your mind and wish to select a different programmable one-

touch key, go back to step 2

before

going on to step 4.

Do not

enter any characters here (if you do, you can’t program a batch

transmission into this key). Instead,

only

press

ENTER

and then proceed to

step 5.

75:Fax Number

Note: Again,

do not

enter any characters here. If you have already

accidentally entered any characters here, press

CANCEL

as many

times as needed to erase

all

of them

before

proceeding to step 5.

Note: If this key already holds a batch transmission, skip to step 6.

Press

COMMUNICATION OPTIONS

five times

and then press

ENTER

. The

display shows:

Batch Tx

Enter Box No. _

Use the numeric keypad to enter the one-digit number for the batch box

you wish to assign to this key. Here, we’ve entered

Batch Tx

Enter Box No. 5_

Note: To change an identifier already entered, press

CANCEL

to erase it.

Then re-enter until the number is just as you want it.

Press

ENTER

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 111

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500