Muratec MFX-1500 User Manual download pdf (Page 19)

Getting started

1.10

Removing the transport screws

Your fax machine is shipped with

transport screws

for protecting your fax

machine’s mirror carriage during shipping.

Important:

Be sure that you do not turn the power on until after you have

removed the transport screws. Otherwise, damage could result.

Remove the four transport screws, as shown.

Get the

protection seals

from your manual kit, and attach one

protection

seal

on each transport screw’s now-open hole. This shields the hole while

you are using the machine.

Important:

Before you use the machine, you must turn off the

transport mode

(see page 1.16).

Note:

Be sure to save the screws for reshipment. If you must ship your machine

for some reason, turn on the transport mode, turn the power off and then

undo the above procedure as follows:

— Remove the seals (reversing step 2);

— Reinstall the screws (reversing step 1).

Installing the printing supplies

Your fax machine prints incoming faxes and copies with a high-speed laser

engine.

The engine requires two types of

printing supplies,

consumables

• The drum cartridge — It yields up to 10,000 normal letter-sized printouts

(see “Specifications,” page

.1). By “normal,” we’re referring to the amount

of text and/or graphics on each page. This is based on an industry-standard

test document.

• The toner cartridge — It yields up to 10,000 such printouts (see

“Specifications,” page

.1).

Here’s how to install these supplies:

Open the top cover.

Open the

printer cover.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 19

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500