Muratec MFX-1500 User Manual download pdf (Page 87)

Beyond the basics

2.42

Use the numeric keypad to enter the four-digit passcode. In our sample here, we’ve

entered

2099

Set PIN Mode

Enter Passcode :2099

Note: If you enter an invalid passcode, the machine’s security feature will reject

the attempt and abort the operation.

Press

ENTER

PIN Mode: Off

Program/Enter

If the setting you see is acceptable, skip to step 6.

Otherwise, proceed to step 5.

To change the setting, press

PROGRAM

repeatedly until your desired setting

appears. In this example, we’ve chosen

Mode1

PIN Mode: Mode1

Program/Enter

Press

ENTER

Autodialing while using the

mask

Note: The following instructions presume you are familiar with how to set and use your

machine’s autodialer. If you need to review, see pages 2.8–2.16.

Note: If the

mask feature is off, you use the autodialer normally.

If you’ve specified “Mode1” — the

goes in

In this mode, before autodialing the desired number the first time, you must add the

its stored one-touch key or speed-dial number. Here’s how:

Make a normal autodialer entry through the entry of the call group(s). The display

will show:

Set PIN Number

Enter Passcode :****

Use the numeric keypad to enter the four-digit passcode. Here, we’ll use our

sample passcode again:

Set PIN Number

Enter Passcode :6296

Press

ENTER

. In our example, we’re setting speed-dial number

001

001:PIN Number

Use the numeric keypad (including either

, if necessary) to enter the desired

, up to eight characters in length.

001:PIN Number

1057_

Press

ENTER

to save the

Note: If you press

ENTER

without entering the

, the fax machine beeps,

indicates “Invalid Number” on the display and then returns you to step 3.

Now you may autodial the number as usual.

Important: While in

Mode 1,

any

autodialer numbers you use must include the

Thus, this applies also to autodialer numbers used with batch transmission

(see pages 2.24–2.27) or programmable one-touch keys (see pages 2.60–

2.70).

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission (see

pages 2.24–2.27), you must store the

access code for the remote unit within the

appropriate batch box.

If you’ve specified “Mode2” — as you autodial, load the code

In this mode, you

don’t

have to add the

to the autodialer setting itself. Instead, you enter

the

manually each time you autodial:

Perform the usual autodialing procedure for the number itself. Here, we’ve entered

speed-dial number 001:

Press Start

S001_

Press

START

. The machine now asks for the

Enter PIN Number

Use the numeric keypad to enter the

Enter PIN Number

1057_

Press

START

. Your machine will dial the number.

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission (see

pages 2.24–2.27), you must store the

access code for the remote unit within the

appropriate batch box.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 146 147

Comments to this Manuals

No comments

Muratec MFX-1500 User Manual Page 87

Comments to this Manuals

Related products and manuals for Fax machines Muratec MFX-1500